Category: General Business News

Liquidity looks at how well a company can handle paying wages, inventory, and lending repayments via measuring its cash or quasi-cash levels. Put another way, it looks at the health of a company’s cash flow to satisfy short-term financial obligations.

It’s important to be mindful of different sectors and what’s normal or healthy based on the time of year. For example, retail and manufacturing feature functionally focused companies, which means seasonality impacts their dynamic working capital requirements.

1. Current Ratio

The current ratio looks at the ratio of current assets divided by current liabilities. It measures how well a company is projected to pay its present obligations. If the result is 1.0 to 3.0, it’s considered financially well. However, if it’s higher than 3.0, suboptimal asset utilization may be incurred by the company, with a lower than industry average suggesting financial concern. It’s calculated as follows:

Current Ratio = Current Assets/Current Liabilities

The resulting current ratio can signal many things. For a growing current ratio, debt could be growing or cash levels falling. When the current ratio is falling, but not too low, and it’s a smooth downward trend, it can indicate the company is getting more efficient at moving inventory, collecting invoices, and reducing debt levels.

2. Quick Ratio or Acid Test

This is determined by taking the current assets and deducting inventory from them. Once that’s calculated, that number is divided by current liabilities. By looking at the business’ on-demand liquid assets without factoring in inventory, it’s calculated as follows:

Quick Ratio or Acid Test = (Current Assets – Inventory)/Current Liabilities

Resulting calculations above or equal to 1.0 show a company’s stable short-term fiscal health. It’s important to be mindful that a very high result can indicate there’s idle cash that’s not being reinvested, distributed to shareholders, or otherwise put to better use.

Defining Solvency

Solvency refers to the ability of a business’ complete assets to satisfy its complete long-term financial obligations and loan repayments. It’s especially helpful when the business is analyzed internally or externally to determine if the business can survive and thrive during challenging economic times (industry-specific or macro challenges). It helps determine the company’s creditworthiness, whether it’s a good bet for an investment, and/or the risk for companies to take on additional debt. It looks at not only the debt on the company’s financial statements, but also how it relates to equity, tangible assets, and EBITDA.

Debt to Equity

This measures how a company relies on debt versus its equity. It’s used when comparing one company against its industry competitors and how the company’s own ratio has trended over time. Looking at companies within the same industry, companies with a higher ratio indicate a riskier financial situation. Similarly, a ratio that’s too low can indicate a business not using debt to expand its operations effectively.

While liquidity and solvency are different, they are complementary for both owners and managers, along with external parties such as investors analyzing for the next potential investment.

The goodwill to assets ratio measures how much of a company’s total assets come from goodwill – an intangible asset like brand value or customer loyalty – and it plays a role in assessing the company’s overall value. It provides a ratio or percentage of the amount of intangible versus tangible assets. Understanding what the ratio represents, how it is calculated, and how to interpret it is essential for effectively applying it to business operations and investment decisions.

Goodwill Defined

Goodwill can be defined as an intangible asset that comes about when the acquiring firm obtains such assets from the acquired firm at a higher value. When it comes to accounting standards, both International Financial Reporting Standards (IFRS) and Generally Accepted Accounting Principles (GAAP), intangible assets must be evaluated for impairment, but don’t need to be amortized. Based upon IFRS 38, goodwill is generated solely during an acquisition and is defined as the amount of the acquisition price for the acquired company over its book value. IFRS 38 does not recognize goodwill generated by the company internally.

Calculating Goodwill

Goodwill = Liabilities – Assets + Purchase Price

If a company looks at acquiring another company for $750,000, and the company being acquired has assets of $900,000 and liabilities of $450,000, the net assets would be $450,000. Based on the goodwill formula:

Goodwill = $450,000 – $900,000 + $750,000 = $300,000

Once the goodwill has been established, the Goodwill to Assets Ratio Formula is used as follows:

Goodwill to Assets Ratio = Unamortized Goodwill / Total Assets

If one company is putting itself up for sale with a selling price of $75 million, it would have to establish its book value, based on recent financial statements, along with its goodwill value. Factors that go into calculating a company’s goodwill include if the company has prime real estate, a well-known brand, a rich list of clients, or intellectual property that sets itself apart from competitors in the industry that won’t expire for years. For example, if its intangible assets are $15 million, subtracted from its selling price of $75 million, its tangible assets or book value would be $60 million.

Based on the ratio, it’s calculated as follows:

$15 million / $75 million = 20 percent

Therefore, the ratio is 20 percent for the company’s goodwill as part of the company’s valuation. Otherwise, if the purchase goes through, whoever buys the company spends 20 percent on the company’s goodwill.

Analyzing the Goodwill to Assets Ratio

This ratio gives an overview of a business’s financial health. The lower the ratio, the more tangible or physical assets that can be sold. Conversely, the higher the ratio, the fewer intangibles a company has. Much like assets that can be written down, so can a company’s goodwill.

This ratio is not one-in-all and should be measured against businesses within the same industry. Based on this analysis, if a company has a large amount of goodwill on its financial statements, if it’s written down, it could still result in a lower valuation despite the company having a large amount of assets.

Looking over time, it shows the importance of ongoing evaluations. In 1975, according to the University of California, Los Angeles, companies on the Standard and Poor’s 500 (S&P 500) had $122 billion of intangible assets and $594 billion of tangible assets, or about a 21 percent intangible to tangible assets ratio. These companies included most industrial and energy sector names like GE, Procter & Gamble, 3M, Exxon Mobil, along with IBM, based on market capitalization. However, in 2018, the ratio increased to 84 percent of intangible to tangible assets. Intangible assets accounted for $21.03 trillion and $4 trillion when looking at most of the companies on the S&P 500, which included Apple, Alphabet, Microsoft, Amazon, and Facebook, based on market capitalization.

While the growth of technology and communication services has risen and skewed the tangible to intangible ratio, it shows the importance of evaluating companies and sectors individually, not just with a broad brush.

Sources

Boom of Intangible Assets Felt Across Industries and Economy

When it comes to the risk of default, Moody’s found that during COVID-19, American businesses had a 7.8 percent chance of defaulting. This is compared to a low of 4 percent in 2021, but lower than the current 9.2 percent risk of default, according to a March 2025 report by the rating agency.

Also known as cash flow available for debt service, CFADS determines how much cash is available to service debt obligations. It looks at different cash inflows/outflows to show both internal (owners and managers) and external audiences (investors) how efficient (or not) a business is in its ability to produce cash flows and manage its debts without defaulting.

While one method businesses use is balancing client sales, it is also common to look at various accounting entries, including Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA). The results of CFADS are often used by financial analysts when creating coverage ratios, including the project life coverage ratio (PLCR), the debt service coverage ratio (DSCR), and the loan life coverage ratio (LLCR). It can sometimes take the place of EBITDA in certain circumstances. It’s important to note that the three coverage ratios show how well a plan is able to service and not default on debt throughout the entire project’s period.

For example, the DSCR = CFADS / Scheduled Debt Service (Interest + Principal Obligations)

Once this is calculated based on the company’s project specifications, if the result is greater than 1, then it signifies and gives greater confidence to internal and external audiences that the company will be able to meet its milestones and final payments.

The most efficient formula for calculating CFADS is as follows:

EBITDA – Taxes – Positive or Negative Result of Working Capital – Capital Expenditures for Maintenance Only

$200,000 (EBITDA) – $30,000 (Taxes) + $20,000 (assuming there’s a negative $20,000 change in working capital) – $40,000 (assuming the capital expenditure investing in maintenance)

CFADS = $150,000

Sometimes the calculation includes dividends, which need to be factored into the calculation. This example assumes it is not part of the calculation.

Interpreting Results

It’s important to understand that a more detailed analysis helps all audiences determine if the projected cash flow is available for different claimants of the business. While most of the calculations are done via the waterfall model, it’s important to analyze it based upon senior and junior debt, along with equity. If a company declares bankruptcy, senior debt holders are the first priority to be made whole (or as whole as possible, depending on the circumstances). Senior debt is collateralized or secured with company assets that are sold off during bankruptcy. From there, junior debt holders are next in line, followed by convertible note holders, then preferred stockholders, and finally common stockholders.

While this calculation is only one part of the way internal and external stakeholders can measure a company’s financial health, with the chance of more firms defaulting on debt, it’s another tool in a financial analyst’s toolbox.

When it comes to analyzing a company’s financials, there are many avenues we can take. One way is through multiples; calculating the EV/2P multiple is the focus of this analysis.

This ratio looks at a business’ enterprise value against its proven and probable 2P reserves. While ratios or multiples are used in valuing companies, this metric is used chiefly to value gas and oil companies for energy sector analysts. Analysts use this calculation to determine the likelihood that a company’s reserve resources can underpin its functioning and expansion efforts. Along with the ratio, analysts use micro and macro factors to determine a company’s financial health, its growth prospects, and whether the business is undervalued or overvalued.

This multiple is similar in comparison to other valuation multiples such as Price-to-Book (P/B), Price-to-Earnings (PE), Enterprise Value/Earnings Before Interest, Taxes, Depreciation, and Amortization. While these other metrics can also value an oil or gas company, understanding how it’s calculated is essential to why it is sector specific.  

Breaking Down the EV/2P Ratio

EV = Market Value of Equity + Market Value of Debt – Cash and Cash Equivalents

It’s determined by the complete market worth asserted by the bond and equity holders (net of cash).

2P = Proven Reserves + Probable Reserves

The reserves of a company give analysts and investors an idea of the likelihood of the recoverability of reserves being produced and assisting the company’s growth. Proven reserves, often denoted as “P1” or “P90,” are rated at a 90 percent chance of recovering successfully. Probable reserves, also called “P50,” have a 1-in-2 chance of recovering. Both reserve types and their likelihood of being recovered are, therefore, referred to as 2P.  

It’s important to note a third category referred to as “possible reserves.” This category is not factored into the company’s valuation because the 10 percent to 50 percent likelihood of reserve recoverability is too low.  

Example

Illustrating how it’s calculated gives a more complete picture of how to analyze the results. For example, say a business‘ market capitalization is $200 million with a net debt of $100 million, giving it an enterprise value of $300 million. Assuming the company has $10 million of probable reserves, $20 million of proven reserves, and $15 million of possible reserves, the calculation is as follows:

EV = $300 million ($200 million + $100 million)

2P reserves = $30 million ($10 million + $20 million)

Therefore, $300 million/$30 million = $10

Every dollar of its market capitalization is worth $10 based on its 2P reserves. Once the calculation is determined, the ratio of the EV/2P is measured against the energy sector’s average ratio. The higher the EV/2P ratio, especially against its peers, the higher valuation the company has compared to other companies with the same amount of 2P reserves. The company’s shares are sold at a higher multiple than other companies.

It’s important to keep in mind that if a company’s financials are stronger or it’s more efficient and provides a better prospect for investors against its peers, its lofty valuation may be justified. It’s also important to not look at valuing companies exclusively with this ratio/multiple but also review other metrics and the macro-economic conditions before making a final investment decision.

While this multiple is primarily used for the energy industry, those who use it should be mindful to not analyze a company in that lens only, but to use a holistic analysis when valuing any type of company.

The subscription economy, according to Forbes, is expected to reach $1.5 trillion in revenue for businesses. With the potential likely realized this year, it’s vital to understand how it is tracked – and more importantly, how it’s able to be tracked on a separate basis.

Also known as net dollar retention (NDR), this metric calculates the proportion of recurring revenue kept from present clients, including upsells and churn, during a defined time frame. Net revenue retention (NRR) evaluates a business’s potential to keep and increase sales from their present clients.

It looks at how well a company leverages existing customer relationships to increase sales through add-ons, complimentary services, etc. It focuses on the long-term growth of recurring revenue from these relationships. It’s calculated as follows:

NRR = (Starting MRR + Expansion MRR – Churn MRR) ÷ Starting MRR

Based on the following assumptions:

Starting monthly recurring revenue: $200,000

Expansion monthly recurring revenue: $40,000

Churn monthly recurring revenue: $20,000

NRR = ($200,000 + $40,000 – $20,000) / $200,000 = 1.10 or 110%

Based on this result, the company is increasing its revenue from existing customers faster than it’s failing to keep revenue from customer churn, an important metric showing growth.

The following factors impact the formula:

Starting MRR is also referred to as the baseline recurring revenue.

Expansion MRR refers to the added sales from newly added clients, upselling, upgrades, and additions to existing customers’ services.

Churn MRR is the sales missed by customers who stopped or lowered their level and type of services with the company.

Defining a Healthy Revenue Retention Rate

Companies that have a score of more than 100 percent show they’re bringing in more revenue from the existing customer base versus what the company is losing from customer churn. If, however, it’s less than 100 percent, customer satisfaction might be lacking, and customers may either be lost or simply not interested in additional services. Since acquiring new customers is more expensive than keeping current ones, it can lead to reflection on how to improve retention rates.

Journal Entry for Recurring Revenue

Assuming there’s a 12-month contract signed for monthly services, the journal entry would be as follows for a $1,000/monthly payment for a total of $12,000.

Once the $1,000 subscription income has been earned, the following journal entry would be entered.

While each industry and business are different, using this metric can help companies determine if there’s a customer retention problem; then they can start the investigation on how to increase retention for the future.

Sources

https://www.forbes.com/councils/forbesfinancecouncil/2023/10/27/the-truth-about-recurring-revenue/