When it comes to defining an impaired asset, its fair market value is worth less than the original cost of the asset – or, more formally, its carrying value. As a company re-evaluates its assets’ value, and when it determines there’s a discrepancy between the book or original value and the current market value, impaired assets that are lower in value are written down on the balance sheet. The business’ income statement shows a loss for the negative difference in value. Impaired assets can be Property, Plant, and Equipment (PP&E), goodwill, or fixed assets.
Making a Judgment on Asset Impairment
One more consideration to get an accurate calculation, according to generally accepted accounting principles (GAAP), is to ensure that accumulated depreciation is subtracted from the asset’s historical or original cost before assessing the difference between the fair market and carrying values. Equally as important is the GAAP recommendation for businesses to perform impairment tests annually.
Assets could be damaged physically, consumer demand may change, or legal factors could reduce its fair market value. These reasons may cause lowered projected future cash flows – lower than an asset’s current carrying value. It, therefore, requires an impairment assessment.
Illustrating With a Real-World Example
Take a business that bought a piece of equipment 24 months ago worth $500,000 and depreciates it $25,000 annually. Using these two figures, we can determine the equipment’s carrying value is as follows for the present year:
[($500,000 – ($25,000 x 2 years)] = $450,000
If the same type of asset (same age, usage, etc.) can be purchased on the open market but is able to be purchased for $400,000 (market value), the asset the business owns would be considered an impaired asset.
The difference between the current market value and the carrying value is: $450,000 – $400,000 = $50,000. The $50,000 would be written down.
It’s important to note that once an asset is impaired, depreciation going forward must be recalculated based upon the new valuation figure.
Criteria to Establish Impairment
According to GAAP, businesses must begin with a recoverability test. If the initial cost of an asset (minus any depreciation or amortization) is more than the non-discount rate adjusted cash flows it’s projected to produce, the asset is considered impaired.
Assuming the asset is deemed impaired, the second part determines how much impairment exists, which is the gap between the original and market value of the asset in question. If the fair value is unspecified, the total of the discount rate adjusted future cash flows is acceptable.
Assuming the total of non-discount rate adjusted future cash flows is $90,000 – the projected undiscounted cash flows through the next 36 months, which is lower than the estimated carry amount (or book value) of $115,000. The recoverability test is passed, so the asset should be impaired. Based on the second step, the impairment loss will be $25,000 ($115,000 – $90,000). If, however, the fair market value is unknown, the projected cash flows of $30,000 per year for the next 36 months should be discounted to present value. This example can assume a 5 percent discount rate:
To calculate the impairment loss with an unknown fair market value: $115,000 – ($28,571.43 + $27,210.88 + $25,915.69) = $115,000 – $81,698.00 = $33,302.00
Whether it’s a time of economic uncertainty or the economy is firing on full cylinders, assets can change value. Businesses that effectively navigate changing conditions are able to increase their chances of surviving or thriving amid the challenges they might face.
Defining an Impaired Asset
February 1, 2023 · Blog, General Business News, Uncategorized
⏱ 3 min read
When it comes to defining an impaired asset, its fair market value is worth less than the original cost of the asset – or, more formally, its carrying value. As a company re-evaluates its assets’ value, and when it determines there’s a discrepancy between the book or original value and the current market value, impaired assets that are lower in value are written down on the balance sheet. The business’ income statement shows a loss for the negative difference in value. Impaired assets can be Property, Plant, and Equipment (PP&E), goodwill, or fixed assets.
Making a Judgment on Asset Impairment
One more consideration to get an accurate calculation, according to generally accepted accounting principles (GAAP), is to ensure that accumulated depreciation is subtracted from the asset’s historical or original cost before assessing the difference between the fair market and carrying values. Equally as important is the GAAP recommendation for businesses to perform impairment tests annually.
Assets could be damaged physically, consumer demand may change, or legal factors could reduce its fair market value. These reasons may cause lowered projected future cash flows – lower than an asset’s current carrying value. It, therefore, requires an impairment assessment.
Illustrating With a Real-World Example
Take a business that bought a piece of equipment 24 months ago worth $500,000 and depreciates it $25,000 annually. Using these two figures, we can determine the equipment’s carrying value is as follows for the present year:
[($500,000 – ($25,000 x 2 years)] = $450,000
If the same type of asset (same age, usage, etc.) can be purchased on the open market but is able to be purchased for $400,000 (market value), the asset the business owns would be considered an impaired asset.
The difference between the current market value and the carrying value is: $450,000 – $400,000 = $50,000. The $50,000 would be written down.
It’s important to note that once an asset is impaired, depreciation going forward must be recalculated based upon the new valuation figure.
Criteria to Establish Impairment
According to GAAP, businesses must begin with a recoverability test. If the initial cost of an asset (minus any depreciation or amortization) is more than the non-discount rate adjusted cash flows it’s projected to produce, the asset is considered impaired.
Assuming the asset is deemed impaired, the second part determines how much impairment exists, which is the gap between the original and market value of the asset in question. If the fair value is unspecified, the total of the discount rate adjusted future cash flows is acceptable.
Assuming the total of non-discount rate adjusted future cash flows is $90,000 – the projected undiscounted cash flows through the next 36 months, which is lower than the estimated carry amount (or book value) of $115,000. The recoverability test is passed, so the asset should be impaired. Based on the second step, the impairment loss will be $25,000 ($115,000 – $90,000). If, however, the fair market value is unknown, the projected cash flows of $30,000 per year for the next 36 months should be discounted to present value. This example can assume a 5 percent discount rate:
To calculate the impairment loss with an unknown fair market value: $115,000 – ($28,571.43 + $27,210.88 + $25,915.69) = $115,000 – $81,698.00 = $33,302.00
Whether it’s a time of economic uncertainty or the economy is firing on full cylinders, assets can change value. Businesses that effectively navigate changing conditions are able to increase their chances of surviving or thriving amid the challenges they might face.
Disclaimer
These articles are intended to provide general resources for the tax and accounting needs of small businesses and individuals. Service2Client LLC is the author, but is not engaged in rendering specific legal, accounting, financial or professional advice. Service2Client LLC makes no representation that the recommendations of Service2Client LLC will achieve any result. The NSAD has not reviewed any of the Service2Client LLC content. Readers are encouraged to contact a professional regarding the topics in these articles. The images linked to these articles are protected by copyright and should not be copied for any reason.
When it comes to businesses and their inventory and accounting methods for managing it, there are a few different ways to approach the task. The three different options to value inventory/implement cost flow assumptions, include: Last In, First Out (LIFO); First In, First Out (FIFO); and Weighted Average Cost Accounting (WAC). This article will focus only on the WAC method.
Weighted Average Cost (WAC) Method
WAC is a way to value inventory based on how much each tranche contributes to the overall valuation of its cost of goods sold (COGS) and inventory. Recognized by both GAAP and IFRS, it’s determined by taking the cost of goods available for sale and dividing it by the quantity of inventory ready to be sold. It’s important to note that while WAC is a generally accepted accounting principle, it’s not as precise as FIFO or LIFO; however, it is effective at assigning average cost of production to a given product.
It’s done primarily for types of inventories where parts are so intertwined that it makes it problematic to attribute clear-cut expenditures to a particular part. This often happens when stockpiles of parts are indistinguishable from each other. It also accounts for businesses offering their inventory for sale all at once. Here’s a visual representation of the formula:
Weighted Average Cost (WAC) Method Formula
WAC per unit = Cost of goods available for sale / Units available for sale
Costs of goods available for sale is determined by adding new purchases of inventory to the value of what the business already had in its existing stock. Units available for sale is how many saleable items the company possesses. Its value is assessed per item and encompasses starting inventory and additional purchases.
When it comes to calculating WAC, there are two different types of inventory analysis systems: periodic and perpetual.
Periodic Inventory System
In this system, the business tallies its inventory at the end of the accounting period – be it a quarter, half or fiscal year – and analyzes how much the inventory costs. This then determines the value of the remaining inventory. The COGS is then calculated by adding how much starting, final, and additional inventory within the accounting period cost.
Perpetual Inventory System
This system puts a bigger emphasis on more real-time management of its stock levels. The trade-off for such real-time tracking of inventory requires more company financial resources. Looking at an example of how a company began its fiscal year with the following inventory can illustrate how it works.
At the beginning of the year, a company had 1,000 units, costing $50 per unit. It also made three additional inventory purchases going forward.
Jan 20: 75 units costing $100 = $7,500
Feb 17: 150 units costing $150 = $22,500
March 18: 300 units costing $200 = $60,000
During the fiscal year, the business sold:
235 units sold during the last week of February
325 units sold during the last week of March
Looking at the Periodic Inventory System, for the first three months of its fiscal year, the company can determine its COGS and the number of items ready to be sold over the first three months of its fiscal year.
Before calculating for the 325 units sold the last week of March, the unit valuation per WAC is: ($64,652.15 + $60,000) / (1225 – 235 + 300) = 1290 = $96.63
Looking at the 325 units sold during the last week of March is calculated as follows:
Based on these options, businesses have the choice, along with LIFO and FIFO, to decide how they want to vary it based on their own business needs.
Understanding the Weighted Average Cost (WAC) Method for Inventory Valuation
January 1, 2023 · Blog, General Business News, Uncategorized
⏱ 4 min read
When it comes to businesses and their inventory and accounting methods for managing it, there are a few different ways to approach the task. The three different options to value inventory/implement cost flow assumptions, include: Last In, First Out (LIFO); First In, First Out (FIFO); and Weighted Average Cost Accounting (WAC). This article will focus only on the WAC method.
Weighted Average Cost (WAC) Method
WAC is a way to value inventory based on how much each tranche contributes to the overall valuation of its cost of goods sold (COGS) and inventory. Recognized by both GAAP and IFRS, it’s determined by taking the cost of goods available for sale and dividing it by the quantity of inventory ready to be sold. It’s important to note that while WAC is a generally accepted accounting principle, it’s not as precise as FIFO or LIFO; however, it is effective at assigning average cost of production to a given product.
It’s done primarily for types of inventories where parts are so intertwined that it makes it problematic to attribute clear-cut expenditures to a particular part. This often happens when stockpiles of parts are indistinguishable from each other. It also accounts for businesses offering their inventory for sale all at once. Here’s a visual representation of the formula:
Weighted Average Cost (WAC) Method Formula
WAC per unit = Cost of goods available for sale / Units available for sale
Costs of goods available for sale is determined by adding new purchases of inventory to the value of what the business already had in its existing stock. Units available for sale is how many saleable items the company possesses. Its value is assessed per item and encompasses starting inventory and additional purchases.
When it comes to calculating WAC, there are two different types of inventory analysis systems: periodic and perpetual.
Periodic Inventory System
In this system, the business tallies its inventory at the end of the accounting period – be it a quarter, half or fiscal year – and analyzes how much the inventory costs. This then determines the value of the remaining inventory. The COGS is then calculated by adding how much starting, final, and additional inventory within the accounting period cost.
Perpetual Inventory System
This system puts a bigger emphasis on more real-time management of its stock levels. The trade-off for such real-time tracking of inventory requires more company financial resources. Looking at an example of how a company began its fiscal year with the following inventory can illustrate how it works.
At the beginning of the year, a company had 1,000 units, costing $50 per unit. It also made three additional inventory purchases going forward.
Jan 20: 75 units costing $100 = $7,500
Feb 17: 150 units costing $150 = $22,500
March 18: 300 units costing $200 = $60,000
During the fiscal year, the business sold:
235 units sold during the last week of February
325 units sold during the last week of March
Looking at the Periodic Inventory System, for the first three months of its fiscal year, the company can determine its COGS and the number of items ready to be sold over the first three months of its fiscal year.
Before calculating for the 325 units sold the last week of March, the unit valuation per WAC is: ($64,652.15 + $60,000) / (1225 – 235 + 300) = 1290 = $96.63
Looking at the 325 units sold during the last week of March is calculated as follows:
Based on these options, businesses have the choice, along with LIFO and FIFO, to decide how they want to vary it based on their own business needs.
Disclaimer
These articles are intended to provide general resources for the tax and accounting needs of small businesses and individuals. Service2Client LLC is the author, but is not engaged in rendering specific legal, accounting, financial or professional advice. Service2Client LLC makes no representation that the recommendations of Service2Client LLC will achieve any result. The NSAD has not reviewed any of the Service2Client LLC content. Readers are encouraged to contact a professional regarding the topics in these articles. The images linked to these articles are protected by copyright and should not be copied for any reason.
When it comes to defining an impaired asset, its fair market value is worth less than the original cost of the asset – or, more formally, its carrying value. As a company re-evaluates its assets’ value, and when it determines there’s a discrepancy between the book or original value and the current market value, impaired assets that are lower in value are written down on the balance sheet. The business’ income statement shows a loss for the negative difference in value. Impaired assets can be Property, Plant, and Equipment (PP&E), goodwill, or fixed assets.
When it comes to businesses and their inventory and accounting methods for managing it, there are a few different ways to approach the task. The three different options to value inventory/implement cost flow assumptions, include: Last In, First Out (LIFO); First In, First Out (FIFO); and Weighted Average Cost Accounting (WAC). This article will focus only on the WAC method.