Cash Flow Available for Debt Service (CFADS)

3 min read

Cash Flow Available for Debt Service (CFADS)When it comes to the risk of default, Moody’s found that during COVID-19, American businesses had a 7.8 percent chance of defaulting. This is compared to a low of 4 percent in 2021, but lower than the current 9.2 percent risk of default, according to a March 2025 report by the rating agency.

Also known as cash flow available for debt service, CFADS determines how much cash is available to service debt obligations. It looks at different cash inflows/outflows to show both internal (owners and managers) and external audiences (investors) how efficient (or not) a business is in its ability to produce cash flows and manage its debts without defaulting.

While one method businesses use is balancing client sales, it is also common to look at various accounting entries, including Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA). The results of CFADS are often used by financial analysts when creating coverage ratios, including the project life coverage ratio (PLCR), the debt service coverage ratio (DSCR), and the loan life coverage ratio (LLCR). It can sometimes take the place of EBITDA in certain circumstances. It’s important to note that the three coverage ratios show how well a plan is able to service and not default on debt throughout the entire project’s period.

For example, the DSCR = CFADS / Scheduled Debt Service (Interest + Principal Obligations)

Once this is calculated based on the company’s project specifications, if the result is greater than 1, then it signifies and gives greater confidence to internal and external audiences that the company will be able to meet its milestones and final payments.

The most efficient formula for calculating CFADS is as follows:

EBITDA – Taxes – Positive or Negative Result of Working Capital – Capital Expenditures for Maintenance Only

$200,000 (EBITDA) – $30,000 (Taxes) + $20,000 (assuming there’s a negative $20,000 change in working capital) – $40,000 (assuming the capital expenditure investing in maintenance)

CFADS = $150,000

Sometimes the calculation includes dividends, which need to be factored into the calculation. This example assumes it is not part of the calculation.

Interpreting Results

It’s important to understand that a more detailed analysis helps all audiences determine if the projected cash flow is available for different claimants of the business. While most of the calculations are done via the waterfall model, it’s important to analyze it based upon senior and junior debt, along with equity. If a company declares bankruptcy, senior debt holders are the first priority to be made whole (or as whole as possible, depending on the circumstances). Senior debt is collateralized or secured with company assets that are sold off during bankruptcy. From there, junior debt holders are next in line, followed by convertible note holders, then preferred stockholders, and finally common stockholders.

While this calculation is only one part of the way internal and external stakeholders can measure a company’s financial health, with the chance of more firms defaulting on debt, it’s another tool in a financial analyst’s toolbox.

Treasury Declares New Beneficial Ownership Reporting Law Will Apply Only to Foreign Companies

3 min read

BOI Law Will Apply Only to Foreign CompaniesThe Trump Administration announced it will no longer apply the beneficial ownership information (BOI) requirements of the Corporate Transparency Act (CTA) to domestic companies. This declaration came first via social media, marking a significant shift in policy.

Under this new directive, U.S. businesses are exempt from the BOI reporting requirements of the CTA. The Treasury Department made the initial announcement on social media, followed by an official press release and a Truth Social post from President Donald Trump, who described the requirement as “outrageous and invasive.”

The bipartisan CTA was originally designed to combat illegal activities like drug trafficking and money laundering by limiting the use of anonymous shell companies. While the ownership information would have been available to law enforcement agencies, it would not have been publicly accessible.

In its March 3 website statement, the Treasury Department clarified that it will not enforce penalties or fines related to the BOI reporting rule under current regulatory deadlines established during the Biden Administration. Furthermore, it will not impose penalties against U.S. citizens, domestic reporting companies or their beneficial owners after new rule changes are implemented.

Treasury’s proposed rules will limit required reporting to foreign companies only, though the precise scope remains unclear – whether this applies exclusively to foreign companies registered in the United States or extends to U.S. companies with foreign ownership.

Previously, reporting requirements covered all businesses formed in the United States and foreign companies registered to operate in any U.S. state or tribal territory.

The Financial Crimes Enforcement Network (FinCEN), which oversees CTA enforcement, appears to have been surprised by this policy change. Days earlier, following court decisions that permitted BOI reporting requirements to proceed, FinCEN had announced plans to extend reporting deadlines to March 21. As of the most recent update, FinCEN’s website has not reflected the Treasury’s announcement, and requests for comment went unanswered.

What Happens Now?

This unexpected announcement has created uncertainty for businesses, particularly regarding already-submitted data.

The law required detailed information from “beneficial owners,” including names, birthdates, addresses, and identification documents. Similar information was required from company applicants – typically individuals who helped establish the company.

Millions of companies had already complied before this announcement, raising questions about the handling of submitted information. Inquiries to FinCEN about the fate of this data have not received responses.

The status of pending legal cases also remains uncertain. Cases continue through at least four federal appellate courts, and additional litigation may emerge to compel administration compliance with the law.

Crucially, the Corporate Transparency Act itself remains valid legislation. Despite the Treasury’s position, the executive branch cannot overturn the laws passed by Congress. It can, however, choose selective enforcement – similar to approaches seen with cannabis legislation. This creates potential complications, as future administrations could reinstate full enforcement.

Reasons to Consider Out-of-State Municipal Bonds

4 min read

Out-of-State Municipal BondsMunicipal bonds (also known as munis) are issued by a state or local government. Interest income is typically paid out twice a year and is not subject to federal taxes. When an investor purchases a bond issued from his own state, the income is generally not subject to state income taxes.

However, there are a few good reasons to consider buying out-of-state municipal bonds. The first reason is to consider bond quality. Each muni bond is given a quality rating based on the municipality’s ability to make the regular interest payments to investors and return their principal when the term matures. To make this determination, agencies like Moody’s and S&P evaluate the issuer’s debt structure, financial stability and long-term economic prospects.

Credit Quality

The highest Moody’s rating is Aaa (the lowest is C); a rating of Baa3 or higher is considered investment grade. The highest S&P rating is AAA (the lowest is D), and a rating of BBB or higher is considered investment grade. While it’s a good idea to invest in highly rated bonds, note that their yields are inversely related to their quality. In other words, the lower the rating, the higher the interest income. Just be sure to consider that with that higher yield comes a higher risk of the bond issuer defaulting. In today’s economic landscape, an average credit rating of AA/Aa is considered a good balance of risk and bond yield.

Diversification

Second, if the investor holds a portfolio of municipal bonds, owning some from other states can help diversify his bond portfolio. If the investor’s home state has lower-rated bonds, investing in higher-rated bonds from other states can lower his bond portfolio’s quality risk. On the other hand, if the investor’s home state has highly rated bonds, purchasing bonds from states with lower-rated bonds can increase the amount of income his portfolio pays out. Remember, too, that it’s important to consider both the bond yield (also known as its coupon rate) and its issuing state’s taxes in order to come out ahead.

More Choices

Note that both California and New York are high-tax states, so it’s particularly important to consider the tax situation before buying there. With that said, there are also good reasons to buy bonds in these two states because they offer a range of quality municipal bonds. On the flip side, some states have fewer bond options to choose from and a lower risk profile, leaving resident investors with few options regardless of the state tax benefit. Be aware that the majority of muni bonds are rated lower than AA in Illinois, Pennsylvania, and New Jersey.

Tax Considerations

There are seven states that do not impose state income taxes: Alaska, Florida, Nevada, South Dakota, Tennessee, Texas, Washington, and Wyoming. New Hampshire recently phased out its tax on investment and interest income. If a muni bond investor lives in a state with no taxes on income, there is no benefit to limiting his purchases to in-state bonds. In this scenario, it’s a good idea to compare muni bonds from states with high-rated and high-yield bonds to build a diversified bond portfolio while also considering the annual tax bill in each of those states.

If a muni bond investor lives in a high-tax state, such as California with a 12.3 percent tax rate for residents with income in the top bracket (effectively 13.3 percent if you include the additional 1 percent surcharge on individuals earning over $1 million), then it makes sense to buy out-of-state munis to help reduce their tax burden.

Despite these general guidelines, investors should check on the muni bond tax status in their home state before making a purchase. Some states, such as Illinois, require residents to pay taxes on in-state muni bond yields. In this situation, the resident may find better deals with out-of-state munis by comparing coupon rates against the income taxes in those states.

Dissecting the Half-Year Convention for Depreciation

3 min read

Half-Year Convention for DepreciationDepreciation can help a business realize tax benefits, maintain compliance with financial reporting requirements, and project asset replacement. The half-year convention for depreciation is an important practice to understand.

For fixed assets, depreciation is recognized and recorded on a 50 percent basis for the initial and concluding years over its schedule. This supposes that fixed assets have been in service for 50 percent of their initial calendar service year upon acquisition. It’s normally implemented by taxation agencies to limit the upper limits for depreciation attestations to 50 percent of the yearly figures.

The balance of the annual 50 percent depreciation amount is recognized/recorded during the depreciation schedule’s last year, as the fixed asset will be removed from service mid-year. Regardless of the type of depreciation – straight-line, double-declining, etc. – the half-year convention applies equally.

This has been instituted because businesses were tempted to buy fixed assets in the third or fourth quarter of a fiscal year and try to deduct it fully via complete depreciation deduction. However, this convention is explicit in that fixed assets in service on or after July 1 may only deduct half of otherwise normal depreciation schedules.

How It Works

In this example, Production Equipment is purchased for $50,000 on April 1, 2022, with a useful life of 7 years. Using the half-year convention, depreciation is as follows:

Straight-line Depreciations = Cost of Asset / Useful Life = $50,000 / 7 = $7,142.86

Half-Year Convention: $7,142.86 / 2 = $3,571.43

This also assumes that there’s no scrap of salvage value. Although there are 7 years for the item’s useful life, with the half-year convention, it’s treated as 8 years for the depreciation schedule:

Year 1: $3,571.43

Year 2: $7,142.86

Year 3: $7,142.86

Year 4: $7,142.86

Year 5: $7,142.86

Year 6: $7,142.86

Year 7: $7,142.86

Year 8: $3,571.43

Context for Depreciation Convention

A depreciation convention gives context on how depreciation is performed by the company. It guides the company on available depreciation methods based on the asset’s useful life, how much the asset can be depreciated once it’s removed from service, and how depreciation is accounted/claimed in the initial and final year during the asset’s recovery period.

Depending on the situation and the type of depreciation convention involved, the following are some different conventions and how they vary:

  • Full Month permits a business to get a complete month of depreciation for the month when the asset has been put in service. There’s no depreciation taken for the month of disposal.
  • Next Month permits a business to start recording depreciation for the fixed assets the following month and being able to record one month of depreciation “when disposed of.”
  • Actual Days permits depreciation to be recorded for every single day an asset is in service during its fiscal year.
  • Mid-Quarter permits depreciation for half of the 3-month business period whenever the asset’s been put in place and disposed of (for both quarters).

Conclusion

While this is illustrative of financial reporting requirements, it’s an important consideration for business owners and their accounting professionals. Optimizing fixed asset depreciation leads to more accurate books, which will help in tax planning.

7 Ways to Teach Your Kids to Save

3 min read

7 Ways to Teach Your Kids to SaveOf all the things you teach your kids when they’re young, saving money just might be one of the most important. Teaching them to delay gratification could help them avoid unnecessary spending and help them learn to value controlling their money. Here are some tips you can use to educate them about this crucial life skill.

Discuss Wants Versus Needs

Often, when your child says, “I need this” he really means “I want this.” Should you hear this, think of it as an opportunity to help him understand the difference between the two. You might explain that a need includes food, shelter, and clothing, while a want is an extra like candy, video games, or the latest pair of sneakers. You can even quiz children at home by pointing out things and asking them if they are needs or wants. This tool can work wonders.

Allow Your Kids to Earn Money

Whether it’s raking leaves or cleaning the house, chores are one of the best ways to teach young ones both the value of work and the value of money – and saving it.

Create Savings Goals

Telling kids that saving money is important might fall on deaf ears. That’s why helping them decide on a goal to work toward is a great way to demonstrate how saving works. It can be a bike, a phone – anything that they want. Helping them track their money can build motivation to continue their chores, with the pot at the end of the rainbow in sight.

Set Up a Savings Place

For younger kids, a piggy bank or mason jar is perfect. For older kids, a savings account or debit cards are smart ideas. To get a feel for what’s out there, here’s a list of the best high-yield savings accounts. If a debit card works better for you, check out FamZoo, Greenlight, or gohenry. All of these apps will even notify you when a purchase is made!

Offer Incentives

Let’s say your child wants to buy a $400 tablet. Offer to match a percentage of what they’ve saved. Or you can offer a $50 bonus when they reach a milestone number, like $200. When they know this up front, there’ll be no stopping them.

Become Their Creditor

If your kid really, really wants something and is too impatient to wait, lend them the money and charge them interest. This way, they learn a valuable lesson: Saving means delaying gratification for a longer amount of time, but if you wait, the item you want to buy will end up costing less.

Let Them Make Mistakes

Putting your kids in charge of their money allows them to make mistakes and learn from them. While you might want to take control and prevent a costly mistake, it might be better to use the error as a teachable moment.

The takeaway from all these saving tips is teaching kids to live within their means. In our day and age, when prices keep going up, it’s one of the best gifts you can give them.

Sources

10 Tips to Teach Your Child to Save Money